Polyester 115
Polyester 115 is a 115 g/m² flag fabric for advertising flags on masts and Beachflag systems. It is a practical choice when you need lightweight outdoor signage with high graphic visibility from both sides, while printing is carried out on one side. The material supports sublimation printing at 1200 dpi and can be finished to match the selected mounting method.
| Intended use | beachflags, flags on the mast |
|---|---|
| Grammage | 115 g/m² |
| Printing technology | Sublimation |
| Print resolution | 1200 dpi |
| Maximum material width | 3,20 m |
| Material attestation | B1 |
| Finish of material | cut to size, sewn in reinforcing tape + eyelets, stitched edges, Tunnel |
| Important information | The material we use ensures almost 100% reflection of the graphics on the other side, so that the motif is visible from both sides |
Price from: €4,00 /m2
Available finishes
1. Top – 5 cm open sleeve (measured flat), Bottom – stitched, Left side – reinforcing strip with carabine hooks each 50 cm, Right side – stitched 
2. Top – 5 cm open sleeve (measured flat), Bottom – stitched, Left side – reinforcing strip with carabine hooks each 50 cm, Right side – stitched 
3. Top – stitched, Bottom – stitched, Left side – sleeve with a hidden rope (top – loop, bottom – sewn-in rope, 40 cm long), Right side – stitched 
4. Top – stitched, Bottom – stitched, Left side – strip with carabine hooks on top and bottom, Right side – stitched 
5. Top – 5 cm sleeve (measured flat) with a sewn-in rope (top – loop, bottom – sewn-in rope, 40 cm long), Bottom – stitched, Left side – stitched, Right side – stitched 
6. Top – stitched, Bottom – stitched, Left side – 3 cm sleeve (measured flat) with a hidden rope (top – wooden toggle, bottom - sewn-in rope, 40 cm long), Right side – stitched 
7. Top – stitched, Bottom – stitched, Left side – stitched, Right side – stitched 
8. Sewn in 3 cm reinforcing tape, eyelets each 50 cm 
9. Top – sewn in reinforcing tape, Bottom – stitched, Left side – stitched, Right side – stitched 
10. Top – sewn in reinforcing tape, eyelets each 50 cm, Bottom – 5 cm sleeve (measured flat), Left side – cut to size, Right side – cut to size 
11. Sewn-in reinforcing tape, eyelets in corners 
12. Top – 5 cm sleeve (measured flat), Bottom – cut to size, Left side – cut to size, Right side – cut to size 
13. Top – 5 cm sleeve (measured flat), Bottom – 5 cm sleeve (measured flat), Left side – tape with carabine hooks each 50 cm, Right side – stitched 
14. Top – stitched, Bottom – stitched, Left side – 5 cm sleeve (measured flat), Right side – stitched 
15. Top – stitched, Bottom – stitched, Left side – sleeve with a hidden rope (top – loop, bottom – sewn-in rope, 40 cm long), Right side – stitched 
16. Top – stitched, Bottom – stitched, Left side – tape with carabine hooks each 50 cm, Right side – stitched 
17. Top – 5 cm sleeve (measured flat), Left side – stitched, Bottom – 5 cm sleeve (measured flat), Right side – stitched 
18. Top – 5 cm sleeve (measured flat), Left side – cut to size, Bottom – 5 cm sleeve (measured flat), Right side – cut to size 
Custom Polyester 115 is a lightweight polyester fabric used mainly for custom advertising flags, mast flags and Beachflag systems. It is selected for brand visibility in front of company buildings, at trade fairs, events, sports venues, hotels, restaurants and retail entrances. The material combines low weight with good movement in the wind, which helps attract attention without making the flag visually heavy.
What makes Polyester 115 practical for flags?
The fabric has a grammage of 115 g/m² and is printed using sublimation technology. This printing method is well suited to textile advertising applications because it supports clear colour reproduction and durable graphics on polyester. The print resolution is 1200 dpi, which helps maintain legibility of logos, slogans and promotional designs on flags viewed from a distance.
Polyester 115 is printed on one side, but the material allows the motif to be visible from both sides. The fabric used for this product provides almost 100% reflection of the graphic on the reverse side, which is important for flags exposed in open spaces where viewers approach from different directions.
Where is this material used?
Polyester 115 works especially well for outdoor flags mounted on masts in front of offices, warehouses, service points and public facilities. It is also used in Beachflag systems placed near entrances, along pedestrian routes or inside event zones. The maximum material width is 3.20 m, which supports the production of large-format textile prints within the available width.
Finishing and mounting options
The final finish should be matched to the way the flag will be installed and used. Available finishing options include cutting to size, stitched edges, tunnel finish and sewn-in reinforcing tape with eyelets. These options make it possible to prepare the flag for mast mounting, system installation or other display methods.
- For mast flags, finishing with reinforcing tape and eyelets can support stable mounting.
- For selected systems, a tunnel finish helps adapt the fabric to the pole or frame.
- For simple textile formats, cutting to size and stitched edges provide a clean, practical finish.
When choosing Polyester 115, it is worth starting with the type of exposure. Flags on masts are usually viewed from a distance and from many directions, so high visibility of the motif on both sides is a key advantage. Beachflag systems, in turn, are often placed closer to pedestrian traffic, where movement, shape and clear branding help guide customers to an entrance, stand or service point.
How to choose the right finish
The finish should follow the mounting method, not only the visual design. A tunnel finish is useful where the fabric needs to slide onto a pole or dedicated system element. Sewn-in reinforcing tape with eyelets is commonly selected for mast flags and other applications where the fabric is attached at fixed points. Stitched edges help strengthen the perimeter and give the textile a more finished look.
- Choose a tunnel when the flag is installed on a pole or compatible display system.
- Choose reinforcing tape with eyelets when the flag must be fixed with hooks, ties or similar fasteners.
- Choose stitched edges for a neat perimeter and better everyday handling.
Artwork preparation for flag printing
Flag designs should be prepared with the viewing distance and movement of the fabric in mind. Large logos, clear typography and simple messages usually work better than very detailed layouts. Because the fabric is printed on one side and the motif is visible on the reverse side, very small text or asymmetric elements should be checked carefully during file preparation. The reverse side will show a mirrored version of the design.
For outdoor use, avoid placing essential information too close to edges that may be sewn, folded or finished as a tunnel. Safe margins help protect important elements such as logos, QR codes, slogans and contact details from being affected by finishing. If eyelets or reinforcing tape are planned, leave enough space around the fixing area.
Use and maintenance recommendations
Polyester 115 is intended for advertising use in outdoor conditions, but proper handling extends the service life of the flag. The flag should be removed from the mast when wind speed exceeds 60 km/h. Regular care is also important: washing should be carried out with delicate detergents, which helps keep the textile clean without unnecessary stress on the print and fabric.
On the market, this type of product may also be described as custom flag fabric, advertising flag textile or polyester flag material. These terms refer to the same practical need: a lightweight printed textile for moving outdoor signage. For specification and ordering purposes, however, Polyester 115 remains the reference product name.
Typical applications
- company flags mounted on outdoor masts,
- Beachflag systems for entrances and event areas,
- trade fair and exhibition signage,
- wayfinding flags for sports and promotional events,
- restaurant, hotel and retail point-of-sale visibility.
